Salvaged & Reclaimed Antique Wood[email protected]2020-11-24T17:01:23+00:00

antique_flooring

Antique Flooring

antique stone

Antique Stone

antique_hardware

Antique Hardware

Salvaged Wood

architectural_antiques

Architectural Antiques

Updated December 1, 2020

Salvaged & Reclaimed Wood

In addition to specializing in antique wood flooring, we supply vintage recycled building materials, mainly in chestnut, oak and pine. Antique beams, boards, joists, etc. can be used for either decorative or structural purposes, such as cathedral ceilings, trim or molding, tables or counter tops. We have a variety of salvaged antique wood in stock, including wallboard and wainscot. We also have a small inventory of exotic wood, which can be used for furniture, musical instruments and other woodworking projects. Occasionally, we offer reclaimed, new wood for reproduction applications (usually extremely wide boards or with other special properties). Please contact us to discuss your needs.

New Chestnut Stock #16

This batch is made up of about 225 linear feet of chocolate chestnut joist stock that measures nominally 2” x 12” x 15’ long. Some joists are closer to 1.5” thick and 11” wide and some are less than 15’ long.

Cost: minimum of one full length plank, $30 per linear foot for this premium material.

Added: October 22, 2020

New Wall Board #52

110sf of hand-planed, painted wall board from a Brimfield, MA house. Widths from approximately 8” to 14”. Lengths of the longer boards are 7’+ (this accounts for damaged ends) and the lengths of the shorter boards are 5’+. Paint is tight.

Cost: 110sf @ $10sf, whole batch only, $1,100.

Added: October 21, 2020

Horizontal Wall Board #51

75sf of painted, hand planed, white pine, horizontal wall boards. The boards are hand planed and painted with a tight paint and have ‘ghosts’ left from a decorative wallpaper.

Cost: 75sf @ 12sf, whole batch only, $900.

Added: July 12, 2020

Sold Horizontal Wall Board #50

90sf of ‘staircase’ white pine wall board. These board came out of and 18C. house in Brimfield, MA. They were horizontal and had a staircase attached to them which leaves the ‘ghost’ of the stairs.

Cost: 90sf @ $10sf, whole batch only, $900.

Added: July 12, 2020

Sold Wainscot Wall Board #49

This is a single, wide white pine wainscot board, clear of knots. 26.5 square feet! It measures 24.5” wide on one end and 21” wide on the other. It is approximately 1” thick and 14’6” long. It is hand planed and partially painted.

Cost: 26.5sf @ $25sf, $660

Added: June 29, 2020

Chestnut Tabletop #1

This chestnut tabletop is ready for a base. You can order many different styles of custom bases from Tablelegs.com for about $500. It was made from two 17" wide chestnut wall planks that have been hand planed, patched and defects filled with resin.

Cost: $1,800 (base not included)

Added: June 3, 2020

Chestnut Tabletop Stock #40

Three chestnut boards that measure 1.5” thick wide and just over 7’ in length. They will make a tabletop that is 34” wide x 7’4" long. Bread board ends could be added to lengthen the tabletop to 7’ 10”.

Cost: Boards ‘as is’, $750 for the set. Made into a finished tabletop by hand-planing and filling in nail holes with resin and patching any defects, $2,000

Added: May 4, 2020

Chestnut Tabletop Stock #39

Three chestnut boards that measure 1.5” thick wide and just over 7’ in length. They will make a tabletop that is 34” wide x 7’4" long. Bread board ends could be added to lengthen the tabletop to 7’ 10”.

Cost: Boards ‘as is’, $650 for the set. Made into a finished tabletop by hand-planing and filling in nail holes with resin and patching any defects, $1,800

Added: May 4, 2020

Chestnut Tabletop Stock #38

Three chestnut boards that measure 1.5” thick wide and just over 7’4 in length. They will make a tabletop that is 34” wide x 7’4" long. Bread board ends could be added to lengthen the tabletop to 7’ 10”.

Cost: Boards ‘as is’, $650 for the set. Made into a finished tabletop by hand-planing and filling in nail holes with resin and patching any defects, $1,800

Added: May 4, 2020

Chestnut Tabletop Stock #37

Two wide chestnut boards that measure 1.5” thick x 18”+ wide and just over 7’ in length. They will make a tabletop that is 36” wide x 7’ long. Bread board ends could be added to lengthen the tabletop to 7’ 6”.

Cost: Boards ‘as is’, $750 for the pair. Made into a finished tabletop by hand-planing and filling in nail holes with resin and patching any defects, $2,000.

Added: May 4, 2020

Chestnut Tabletop Stock #36

Two wide chestnut boards that measure 1.5” thick x 18”+ wide and just over 7’ in length. They will make a tabletop that is 36” wide x 7’ long. Bread board ends could be added to lengthen the tabletop to 7’ 6”.

Cost: Boards ‘as is’, $750 for the pair. Made into a finished tabletop by hand-planing and filling in nail holes with resin and patching any defects, $2,000.

Added: April 28, 2020

Wall Board #47

This batch of painted wainscot boards can be purchased individually.

Cost: price varies

Added: February 19, 2020

Wall Board #48

This batch of painted wall boards came from the same house, but two different areas. It would make a wall that was 6’6” wide x 7’2” tall. Boards are T&G. Average width of about 10”.

Cost: 45sf @ $10sf, whole batch only, $450.

Added: February 13, 2020

New, wide plank white pine live edge boards

This is new white pine dried for about 10 years inside my barn. The planks range in width from 18” to 20”+ x 12’8” tall x 1” thick. They would make great table tops.

Cost: $7.50sf any quantity.

Added: February 13, 2020

Wide plank white pine wall boards #3

Here is another batch of super wide (20″ to 26″), hand-planed and hand-beaded Eastern White Pine. It is intended to be painted after installation for an antique look.

Cost: 70sf @ $15sf, whole batch $1050. Whole batch includes an extra 13” wide and a 17” wide plank. Partials are $20sf.

Added: February 13, 2020

Antique Brown Board #3

500sf+ of chestnut sheathing. Most is 1” thick. Widths range from 4” to 8”+ and lengths from 3’ to 12’+. Great for interior wall or ceiling applications.

Cost: $6sf for whole batch ($3000), $8sf for partials.

Added: February 11, 2020

Oak Burl Tabletop Stock #34

This oak burl is new wood from a tree that fell years ago. The pieces are sister planks so they make a nice mirror image of each other and will make a fabulous small table.

Cost: $500

Added: February 4, 2020

Oak burl tabletop stock #35

This oak burl is new wood from a tree that fell years ago. It has been air drying for about 10 years. The surface undulates because the wood shrank due to the beautiful grain patterns.

Cost: $225

Added: February 4, 2020

Tabletop Stock #33

Two wide, antique white pine boards that will make a tabletop 9’4” (or less) in length x 36” wide x approximately 7/8” thick.

Cost: $750

Added: January 30, 2020

Tabletop Stock #32

Two wide, white pine boards that will make a tabletop 9’4” (or less) in length x 38” wide x approximately 7/8” thick.

Cost: $750

Added: January 30, 2020

Table Top Stock #30

Original antique white pine single board for a table top or other project.

Cost: $325

Added: November 10, 2019

Table Top Stock #29

Original antique black Walnut single board for a table top or other project.

Cost: $180

Added: November 10, 2019

Table Top Stock #28

Original antique black Walnut single board for a table top or other project.

Cost: $350

Added: November 10, 2019

Table Top Stock #26

Original antique white pine single board for a table top or other project.

Cost: $150

Added: November 10, 2019

Miscellaneous hand planed wall board

This is a mix and match batch of hand-planed and painted wall board. Boards range from 3’ to 7’ tall +/- and widths range from 10” to 16” +/-. It can be purchased as a lot or by the individual board.

Cost: $5 per square foot

Added: November 10, 2019

Antique Wall Board #46

280sf of super wide pine wall board from an early 18th century CT house. These boards made up the walls the Brewer Kitchen that was salvaged and put on display by the Springfield Museum.

Cost: 280sf @ $20sf, whole batch only, $5,600.

Added: November 10, 2019

Wide plank chestnut Wall Board #42:

100sf of early, hand-planed, hand-beaded chestnut wall board. Would cover an area that was 15’ long and 6’7” tall. Has white wash on front surface and ghosts from plaster and lathe. Some shorter material for repairs.

Cost: $12sf, whole batch only, $1,200

Added: November 10, 2019

Antique Brown Barn Board #2

A nice, economical, small batch of brown board from a Thompson, CT barn. This material was barn siding and was painted white on the outside.

Cost: 150sf @ $5sf, whole batch only, $750.

Added: November 10, 2019

Chestnut mantel beam #1

This beam came out of the fallen church on route 101 in Dayville, CT. It measures 8” x 9.5” x 12’.

Cost: $750

Added: November 10, 2019

Oak mantel beams

These beams came out of a recently dismantled, 18th century Dayville, CT house. They measure approximately 7” x 7” and range from 7’ to 13’ long.

Cost: up to 8’ long, $425. From 9’ to 13’, $750

Added: November 10, 2019

Pantry shelving for built in cupboard

Built in pantry boards removed from an Ossipee, NH house C.1837.

Cost: set only, $300.

Added: November 10, 2019

Antique mahogany Mantel Beam #25

Hand-hewn mahogany beam that was used as dunnage on a sailing ship back in the day. Beam was originally 60’ long and ran the keel of the ship. Beam measures 13” x 13” x 8’5”. Extremely heavy.

Cost: $1,850

Added: November 10, 2019

First Period Summer Beam c.1682

This summer beam was removed from a first period house in Wabam, MA, recently during 'modernizing' renovations.

Cost: $1,250

Added: November 10, 2019

Antique figured tiger maple #5

Two pieces of highly figured, 100 year old, tiger maple. They are 3” x 4” x ~10’-6” each. They both have one edge that is a partial live edge.

Cost: minimum of 1 full length, $25 per linear foot

Added: November 10, 2019

Antique, highly figured tiger maple #4

I have 24 linear feet of highly figured, 2” x 6”, 100 year old tiger maple from upstate Minnesota.

Cost: minimum of 3’ to 4’ depending on what’s left, $100 per linear foot

Added: November 10, 2019

White Pine Sub-Flooring Batch #11

~400sf+ mostly live edge, early white pine sub-flooring. Various lengths and widths. Thickness varies from ~ 3/8” to~ 5/8”+/-.

Cost: whole batch only, $800

Added: November 10, 2019

New Wide White Pine Flitch

3 boards are live edge and have been kiln dried and milled. They are all 5/4 thick. Measurements: all are 5'6" tall; 38" wide (SOLD), 36" wide (27" heart), 34" wide (24" heart).

Cost: $200 each

Added: November 10, 2019

Wide plank single board Tulip wood

Huge, single board that was an early country store counter. This counter top is made of Poplar or Tulip wood. It measures 28” wide x 99” long x 1” thick and the front corners are rounded.

Cost: $1,250

Added: November 10, 2019

Sold Chestnut mantel beam #3

This beam has been hand-planed to reveal the beautiful chestnut color and grain patter. It measures 5.25” x 6.5” x 8’ long.

Cost: $425

Added: November 6, 2019

Sold Chestnut mantel beam #2

This beam has been hand-planed to reveal the beautiful chestnut color and grain pattern. It measures 7” x 7” x 8’ long.

Cost: $425

Added: November 6, 2019

Sold Antique Pantry Shelving

The components of a small pantry including shelving and a great door. All hand planed with and original bluish-green paint.

Cost: whole package only, $ 1,250.

Added: June 21, 2019

Sold Antique Brown Barn Board #1

A nice, economical, small batch of brown board from a Thompson, CT hay loft.

Cost: 40sf @ $5sf, whole batch $200. Partials 7.50sf.

Added: May 29, 2019

Sold Antique wide plank chestnut wall board #40

500sf of 18th century, wide plank chestnut wall boards. When trimmed and patched this batch will make a 70' long wall that is 7'+ tall.

Cost: 500sf, whole batch, $18,500 or partials, by-the-board, @ $50sf.

Added: January 1, 2019

Sold Wide wainscot Wall Board #43

This very wide material was wainscot from an early MA colonial. Boards are white pine, hand-planed and almost clear of knots. The boards will look incredible once the paint is stripped.

Cost: whole batch, 85sf @ $20sf = $1700, or by the board @ $25sf

Added: December 15, 2018

Sold Wide plank white pine wall boards #1

430sf of super wide (18" to 26" wide), hand-planed and hand-beaded Eastern White Pine.

Cost: whole batch, $20sf or $8,600; partials, $25sf

Added: December 13, 2018

Sold Wide plank white pine wall boards #2

Super wide plank (18" to 26"), NEW hand-planed and hand-beaded Eastern White Pine.

Cost: whole batch of 230sf @ $20sf or $4,600; partials, $25sf

Added: December 13, 2018

Sold Chestnut Stock #15

Wide plank chestnut boards. Total of 305sf of clear, cabinet grade chestnut.

Cost: Set #1, 160sf @ $25sf, $4,000; Set #2, 145sf @ $25sf, $3,625. Whole batch: 305sf @ $20sf, $6,100.

Added: December 12, 2018

Sold Table Top Stock #31

Original antique white pine single board for a table top or other project.

Cost: $500

Added: December 2, 2018

Sold Wall Board #45

A nice batch of hand-planed, painted antique wall boards from Ossipee, NH. C.1837.

Cost: whole batch only, $1,080.

Added: August 8, 2018

Sold Wall Board #44

A fantastic run of numbered, powder blue antique wall boards from Ossipee, NH. C.1837.

Cost: whole batch only, $2,150.

Added: August 8, 2018

Sold Hemlock Wall

200sf of very wide Hemlock wall boards up to 20” wide. All have plaster ‘ghosts’ on at least one side. Almost all are at least 7’6” tall and 6/4 thickness.

Cost: $10sf, whole batch only, $2,000

Added: October 25, 2017

Sold Table Top Stock

This material was attic flooring, but has a much darker patina than the rest of the floor. It would make a table top up to 40” wide and 10’ long, plus some narrow material for the skirt.

Cost: $20sf, whole batch only, $1,000

Added: October 16, 2017

Sold Antique Wall Board #41

1st period feather-edge reclaimed wall board. Two sections plus a door. The main section is 13’+ wide x 7’1” tall. Boards are 7” to 19” wide. The additional section is 7’ wide x 4’5” tall.

Cost: 130sf @ $10sf, whole batch only, $1,300

Added: August 14, 2017

Sold Large, hand hewn pine beam

One very large, antique, hand hewn white pine beam available for mantel beam, summer beam, or stair treads.

Cost: $100 per linear foot, whole beams only

Added: August 14, 2017

Sold Chestnut Joist Set #4

Twelve chestnut joists in great condition. ~2.5" x 7" straight sawn. Eight are 11'5", four are 11'1.5", two are 7'2".

Cost: $2,000, full set only

Added: August 14, 2017

Sold Antique figured tiger maple #6

Four pieces of figured, 100 year old, tiger maple. They are 2” x 6” x 8’ each and the best figure is on the 2” edges.

Cost: minimum of 1 full length, $25 per linear foot, $200 each 8’ piece

Added: August 14, 2017

Sold Wide plank mahogany #4

Large single piece of 'old stock' mahogany.

Cost: $850

Added: August 14, 2017

Sold African wide plank Mahogany #3

Very large and clear African Mahogany plank with live edges. Milled, kiln dried and very flat. Perfect for island top or table top.

Cost: $750

Added: August 14, 2017

Sold Wide plank African mahogany #2

Very large and clear African Mahogany plank with live edges. 45" wide x 5'3" long x 1&3/4" thick. 38 board feet. Milled, kiln dried and very flat.

Cost: $900

Added: August 14, 2017

Sold Wide plank African mahogany #1

Very large and clear African Mahogany plank with live edges. 41"+ wide x 7'+ long x 1&3/4" thick. 49 board feet. Milled, kiln dried and very flat.

Cost: $1,250

Added: August 14, 2017

Sold Wide plank Brazilian Mahogany

Two Brazilian mahogany planks that are approx. 2” thick x 15” wide x 15’ long. This lumber is old but has never been used.

Cost: $2,000

Added: August 14, 2017

Sold Antique Wall Board #30

These are 53sf of hand planed and beaded and heavily painted wall boards. As a horizontal wall section it would measure 7'8" wide x 7' tall.

Cost: 53sf @ $18.50, whole batch only, $980

Added: August 14, 2017

Sold Oak Stock #3

5/4 oak that was originally used as cow stanchions. 20+ pieces measuring approximately 32” tall and varying widths. 26+ pieces approximately 4” to 5” in widths and 48”+/- long.

Cost: whole batch only, $500

Added: August 14, 2017

Sold New White Pine Stock

For "green" building projects: wide, long rough sawn boards salvaged from downed trees. For flooring, wall or ceiling boards or even wide exterior barn siding.

Cost: most is $5 per square foot

Added: August 14, 2017