Reclaimed Antique Flooring Inventory

Some of the original surface floors we sell were hand-planed and foot worn over hundreds of years and are smooth enough to install and walk on without sanding.  These are for someone who wants an original 200 to 300 year old floor.  Other flooring batches are rough sawn and need to be screened or sanded before they can be walked on. The antique flooring for sale below is available only as complete batches. Subscribe to our mailing list for periodic e-mail updates on this and other inventory.

In general, you should plan on 10 - 20% waste. We can work with you to match batch sizes to your floor plans. Please contact us with questions (860-655-5259) or if you are interested in purchasing any of the reclaimed antique flooring shown below.

For Sale: Updated 7/22/15

Flooring batch #179: NEW

650sf of super wide, foot-worn antique Eastern White Pine from a NH attic.  Widths of 13” to 24” and lengths of approximately 8’ to 16’.  A high percentage of the floor is made up by relatively short material. 

Cost:  650sf @ $16sf, whole batch only, $10,400

More Details

Flooring batch #178: NEW

425sf of original surface, rough sawn (sand grade) PA Eastern White Pine.  Flooring is too rough to be used ‘as is’.   Should be cleaned and sanded once installed.  Widths of 6” to 18” and lengths of approximately 8’ to 15’. 

Cost: 425sf @ $12sf, whole batch only, $5,100

More Details

Flooring batch #177: NEW

200sf of original surface (foot worn), lightly painted, high quality PA Eastern White Pine.  Widths of 8” to 15” and lengths of approximately 13’ +/-. 

Cost:  200sf @ $12sf, whole batch only, $2,400

More Details

Flooring batch #176: NEW

340sf of high quality, straight sawn PA Eastern White Pine.  Widths from 5” to 15” and lengths of approximately 6’ to 12’, plus some shorts.  Needs to be cleaned and trimmed before installation. 

Cost:  340sf @ $16sf, whole batch only, $5,440

More Details

Flooring batch #175: NEW

160sf of wide, hand-planed/foot worn, PA Eastern White Pine.  Widths of 11” to 20” and lengths of approximately 4’ to 12’+. 

Cost:  160sf @ $18sf, whole batch only, $2,880

More Details

Flooring batch #173: NEW

290sf of original straight sawn surface Northern Hard Pine (aka Red Pine).  A small batch of very dense, good quality,  PA attic flooring.  Lengths of 3’ to 15’, widths of approximately 8” to 12” and 5/4” thickness. 

Cost:  290sf @ $13.50sf, whole batch only, $3900

More Details

Flooring batch #172: SOLD

900sf of super wide, hand-planed original surface Pumpkin Pine flooring (Spruce) from an early 19thC. VT attic.  Majority of lengths from 11’ to 15’+ with some shorter and widths ranging from 10” to 20” with an average of 14” to 15” wide. 

Cost:  900sf @ $25.50sf, whole batch only, $23,000

More Details

Flooring batch #171: SOLD

250sf of painted Northern Hard Pine (Red Pine) from and 18C. PA log house.  Lengths from 9’ to 14’ and widths from 10” to 13”.  Thickness is 5/4. 

Cost:  250sf @ $12sf, whole batch only, $3000

More Details

Flooring batch #170: 

500sf of very wide, foot worn, original surface Northern Hard Pine (Red Pine) from an 18C. PA log house.  Majority of flooring is 12’ to 16’ long with a few shorts and majority of widths from 12” to 16” with a few narrower.  The thickness is 5/4 with slight wear.

Cost:  500sf @ $18sf, whole batch only, $9000

More Details

Flooring batch #169: 

Very small batch, 40sf, of original surface, foot worn 19th C. maple.  This batch I removed from a Pomfret, CT house that is slated for demolition.  Majority of boards are 6’ long and 9”+ wide. 

Cost: 40sf @ $12sf, whole batch only, $480.

More Details

Flooring batch #168: 

365sf of original surface, foot worn 19th C. oak.  This batch of oak I removed from a Pomfret, CT house that is slated for demolition.  It has modest widths of 7” to 13” and modest lengths of approximately 4’ to 9’+. 

Cost: 365sf @ $16sf, whole batch only, $5,840.

More Details

Flooring Batch #167: SOLD

600sf of beautiful, original hand-planed, Eastern White Pine antique flooring from PA.  Pennsylvania consistently produces the best antique Eastern White Pine than any other state.  Great widths with a range from approximately 9” to 18” and most lengths are just under 12’ and just under 15’ with a hand-full of shorts. 

Cost: 600sf @ $20sf, whole batch only, $12,000

More Details

Flooring Batch #166:

375sf of partially foot worn, original surface PA white pine.  The original surface is circular sawn with some foot wear, but should be sanded or screened.  Typical 5/4” thick with widths of 5” to 16” and lengths from 7’ to 15’+, plus some shorts.  Floor is in original ‘as salvaged’ condition and will need edges and ends trimmed, but it has been gently washed to remove the decades of fine dust. Could be added to batches #162, #163, #164, and #165 for a larger batch, up to 2,245sf. 

Cost:  375sf @ $10sf, whole batch only, $3750

More Details

Flooring Batch #165: SOLD

800sf of good quality, wide and long, original surface, PA white pine.  The original surface is straight sawn with some foot wear, but should be sanded or screened.  Typical 5/4” thick with widths from 7” to 14” and lengths from 6’ to 15’+. 

Cost:  800sf @ $17.50, whole batch only, $14,000

More Details

Flooring Batch #164:

400sf of modest quality (some gouging at nail holes), original surface, PA white pine.  The surface is straight sawn and would need to be sanded or screened.  Typical 5/4” thick with widths from 7” to 12” and good lengths of 8’ to 14’+. 

Cost:  400sf @ $12.50, whole batch only, $5,000

More Details

Flooring Batch #163:

320sf of good quality, original surface, PA white pine with about 20% shorts (3’6” to 4’).  The surface is straight sawn and partially foot worn, but would most likely need to be sanded.  Typical 5/4” thick with modest widths from 7” to 12” and lengths of 12’ to 14’ plus shorts.

Cost: 320sf @ $14.50, whole batch only, $4,600

More Details

Flooring Batch #162:

350sf of super wide, original surface, PA white pine.  The surface is straight sawn and partially foot worn.  Typical 5/4” thick with widths from 13” to 20”, lengths vary from about 7’ to 12’. 

Cost:  350sf @ $18sf, whole batch only, $6,300

More Details

Flooring Batch #161:

650sf+ of c.1700 sanded Northern Hard Pine (aka Red Pine) from Newport, RI.  This flooring is mostly sanded with some original surface in spots.   Widths of approximately 6” to 12”+/- and lengths from 6’ to 13’, plus some shorts.  Thickness averages approximately 7/8”.

Cost:  $12sf, whole batch only, $7,800

More Details

Chestnut Stock #15: 

#25 boards (160sf) + #22 boards (165sf) of clear, high grade chestnut.  Total of 325sf.  The #25 boards measure approximately 9” wide x 8’-8” long x 7/8” thick.  The #22 boards are 13” wide x 9’ and made with a wide board (9” to 13”) with a narrow board nailed to it. 

Cost:  $25sf, whole batch only, $8,125

More Details

Flooring Batch #155: 

160sf of original surface antique oak.   Great burnished surface, no need for sanding.  Approximately 95sf are 11’3” long and the rest is about 6’ or less in length.  Some extra material that can be used for patching, etc. 

Cost: $16.50sf, whole batch only, $2640

More Details

Flooring Batch #154: 

300sf of hand-planed, original surface Hemlock.  Attic flooring from an early MA house.  It has been cleaned and scrubbed and ready to install.  Widths of approximately 6” to 11” and most lengths are 13’ to 14’+. 

Cost: $12sf, whole batch only, $3,600

More Details

Flooring batch #152:

60sf of early 19C. maple flooring from Wilton, CT.  Straight sawn both sides with a light brown coat of paint on the top surface.  Full 1” thick. 

Cost: $10sf, whole batch only, $600.

More Details

Flooring batch #12: Approximately 890sf of original surface attic chestnut flooring. 

Cost: $16.50sf, whole batch only, $14,685 

More Details

Flooring batch #144: 

280sf of partially painted and partially over nailed 18C. oak flooring from Wilton, CT.  Original burnished surface.  Moderate widths and moderate quality because of widths, nailed over sections and paint. 

Cost: $12sf, whole batch only, $3360.

More Details

Flooring batch #139: 

130sf of early 18C., wide poplar flooring from a Fairfield, CT house.  Lengths from 7’6” to 10’+.  Widths from 12” to 19”. 

Cost:$14.50sf, whole batch only, $1,885

More Details

New wide board white pine flooring

We have 'blank' stock available to be milled and hand-planed for flooring, which will vary in length from 6'+/- to 16'. The widths will also vary from 8" to 20" depending on what is available.

More Details
Cost: any quantity, $12.50sf. Blanks are $5sf

Batch #63

450+ square feet of relatively new (30 to 40 years old), straight sawn oak from local horse barn. Boards average 10" wide and range from 5'+/- to 9'+/-.

More Details
Cost: whole batch only, $5400 ($12sf)

<Back to the top>

< MAILING LIST> <HOME> <CONTACT>